Welcome to the Gsm Forum ShaarpMind.






+ Reply to Thread + Post New Thread
Results 1 to 2 of 2
  1. #1
    Member
    Join Date
    Feb 2011
    Posts
    10,593

    Thumbs up C1-01 user code by MT


     
    How to remove C1-01(Rm-607) user code with MT BOx by USB cable?
    /
    set local mode*& test mode ok

    but failed to read info



    any idea
    ?

  2. #2
    Member
    Join Date
    Feb 2011
    Posts
    36,105

    Thumbs up C1-01 user code by MT


     
    here is u r answer cheq this i hope u understand c1 rm- 607 successfully flashed and usercode reset by ATF.. Number of Image Files: 3
    Processing Image File :
    rm607__03.35.mcusw
    Processing Image File :
    rm607__03.35.ppm_m_c
    Processing Image File :
    rm607__03.35.image_m_c_0595609
    AUTO SELECTED DEAD USB FLASHING...
    If Flashing DOES NOT Start in 5 Seconds*
    Then Perform Steps 1* 2* 3 and 4...
    1. Remove USB and Battery...
    2. Insert USB.
    3. Insert Battery. (Some phones boot automatically)
    4. Please Power on phone shortly..
    Infineon USB Boot: F00A1FB300020303010100FF
    Sending PBL...
    PBL Successfully Sent...
    Sending SBL...
    SBL Successfully Sent...
    Setting Transmission Speed Done...
    Flash Chip Manufacturer: Intel Electronics Corp.
    Flash Boot Successful...
    Current File : rm607__03.35.mcusw
    Image Type : Main Firmware
    Sections : 05
    Compile Name: rm607__03.35.mcusw_ebl_psi.fls
    Data Size : 26217904 Bytes
    Sending Certificate Block
    FIRMWARE Certificate Block Sent Successfully...
    Processing Section 01 of 05
    FIRMWARE Erase Block: 0x40000000~0x4001FFFE
    Start Erasing...
    Erasing Please Wait...
    Block Erase Done...
    Preparing Data Blocks...
    Data Size: 131072 bytes
    Data Checksum: A830
    Uploading Data Blocks to phone...
    Block Write Successful...
    FIRMWARE Data Blocks uploaded to phone...
    Processing Section 02 of 05
    FIRMWARE Erase Block: 0x40040000~0x4007FFFE
    Start Erasing...
    Erasing Please Wait...
    Block Erase Done...
    Preparing Data Blocks...
    Data Size: 262144 bytes
    Data Checksum: 0000
    Uploading Data Blocks to phone...
    Block Write Successful...
    FIRMWARE Data Blocks uploaded to phone...
    Processing Section 03 of 05
    FIRMWARE Erase Block: 0x40080000~0x4009FFFE
    Start Erasing...
    Erasing Please Wait...
    Block Erase Done...
    Preparing Data Blocks...
    Data Size: 131072 bytes
    Data Checksum: 865C
    Uploading Data Blocks to phone...
    Block Write Successful...
    FIRMWARE Data Blocks uploaded to phone...
    Processing Section 04 of 05
    FIRMWARE Erase Block: 0x400A0000~0x4019FFFE
    Start Erasing...
    Erasing Please Wait...
    Block Erase Done...
    Preparing Data Blocks...
    Data Size: 1048576 bytes
    Data Checksum: 097B
    Uploading Data Blocks to phone...
    Block Write Successful...
    FIRMWARE Data Blocks uploaded to phone...
    Processing Section 05 of 05
    FIRMWARE Erase Block: 0x40400000~0x41BFFFFE
    Start Erasing...
    Erasing Please Wait...
    Block Erase Done...
    Preparing Data Blocks...
    Data Size: 24641536 bytes
    Data Checksum: C5EE
    Uploading Data Blocks to phone...
    Block Write Successful...
    FIRMWARE Data Blocks uploaded to phone...
    Data Verification Successful...
    Current File : rm607__03.35.ppm_m_c
    Image Type : PPM Image
    Sections : 01
    Compile Name: package_m_c.ppm_ebl_psi.fls
    Data Size : 3254104 Bytes
    Sending Certificate Block
    PPM Certificate Block Sent Successfully...
    Processing Section 01 of 01
    PPM Erase Block: 0x41C00000~0x421FFFFE
    Start Erasing...
    Erasing Please Wait...
    Block Erase Done...
    Preparing Data Blocks...
    Data Size: 3250760 bytes
    Data Checksum: 932D
    Uploading Data Blocks to phone...
    Block Write Successful...
    PPM Data Blocks uploaded to phone...
    Data Verification Successful...
    Current File : rm607__03.35.image_m_c_0595609
    Image Type : CONTENT Package
    Sections : 01
    Compile Name: package_m_c_0595609.image.fls
    Data Size : 11799824 Bytes
    Sending Certificate Block
    CONTENT Certificate Block Sent Successfully...
    Processing Section 01 of 01
    CONTENT Erase Block: 0x42200000~0x43E5FFFE
    Start Erasing...
    Erasing Please Wait...
    Block Erase Done...
    Preparing Data Blocks...
    Data Size: 11796480 bytes
    Data Checksum: E48A
    Uploading Data Blocks to phone...
    Block Write Successful...
    CONTENT Data Blocks uploaded to phone...
    Data Verification Successful...
    Total Flashing Time (Erase + Flashing) : 00:07:26
    (Booting time is NOT Included)
    Waiting for Phone to Start-Up..(Max 100 seconds)
    If Windows is Installing Drivers...
    Phone Polling MIGHT Exit Automatically.
    Elapsed Time: 5 Seconds...
    Elapsed Time: 10 Seconds...
    Elapsed Time: 15 Seconds...
    Elapsed Time: 20 Seconds...
    MCU: V 03.35 02-12-10 RM-607 (c) Nokia
    IMEI: 353799046358313
    Model : J C1-01
    Mastercode : 2252721664
    Product Serial Number: HUB546600
    Product Code : 0596363
    Module Code : 0204427
    Basic Production Code: 0585582
    Default SN Type : 0
    MCU SW Version : V 03.35 02-12-10 RM-607 (c) Nokia M_C
    BT MCM Version : 19b5-22012
    PPM Version : V 03.35 02-12-10 RM-607 (c) Nokia
    HW Version : 1000
    RFIC Version : 96
    LCD Version : AUO
    Content Pack Version : Content: m_c_0595609 V 03.35 02-12-10 RM-607 (c) Nokia
    ********** SIMLOCK INFO **********
    CONFIG_DATA : 0010100000000000
    PROFILE_BITS : 800000000003000B
    Asic : 11
    Provider : Default Test Operator
    Block [1] 1:Open 2:Open 3:Open 4:Open 5:Open
    Block [2] 1:Open 2:Open 3:Open 4:Open 5:Open
    Block [3] 1:Open 2:Open 3:Open 4:Open 5:Open
    Block [4] 1:Open 2:Open 3:Open 4:Open 5:Open
    Block [5] 1:Open 2:Open 3:Open 4:Open 5:Open
    Block [6] 1:Open 2:Open 3:Open 4:Open 5:Open
    Block [7] 1:Open 2:Open 3:Open 4:Open 5:Open
    ST_SIMLOCK_TEST : PASSED
    ST_LCD_TEST : PASSED
    SECURITY_CODE : 11943
    PHONE_MODE : TEST MODE
    ================================================
    Dynamic Camera Configuration
    ================================================
    DCC ID : NI00CS0000040C213402
    DCC Ver: 002005
    Status : OK
    FACTORY SET TO : Factory Set Full
    OK
    FACTORY SET TO : Leave Factory
    OK
    FACTORY SET TO : Production Tune
    OK
    FACTORY SET TO : Production Tuning
    OK
    FACTORY SET TO : Reset User Code
    OK
    FACTORY SET TO : Service Centre
    OK
    FACTORY SET TO : Software Upgrade
    OK
    FACTORY SET TO : User Data
    OK
    RESET LIFE TIMER TO : 0000:00 here is original post atf team First In the World ATF C1-01 RM-607 USB Flashing!!


 
+ Reply to Thread

Similar Threads

  1. I am new user SKY U530k user code - VygisToolBox
    By NIZAR2006 in forum VygisToolbox
    Replies: 6
    Last Post: 02-09-2012, 06:28 AM
  2. Nokia n85 lock code(user) code - failed to read info
    By djamelkg2 in forum Cyclonebox
    Replies: 8
    Last Post: 12-27-2011, 04:09 AM
  3. Replies: 5
    Last Post: 06-04-2011, 03:37 AM
  4. User Code is: Error! Crypted user code!
    By NOKIA127 in forum Infinity-Box
    Replies: 1
    Last Post: 05-29-2011, 11:35 PM
  5. Replies: 3
    Last Post: 02-21-2011, 01:55 AM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts