Welcome to the Gsm Forum ShaarpMind.






+ Reply to Thread + Post New Thread
Results 1 to 2 of 2
  1. #1
    Member
    Join Date
    Apr 2012
    Posts
    565

    Thumbs up nokia 2700c-2 rm-561 disconnected while flashing + charging problem - Nokia issue solution ?


     
    Hello. I have big problem with nokia 2700c rm-561. In first place phone wont charge* when plugged in charger on lcd appears message charger not supperted. First thing was changed betty and flashed* but after few % cabel was disconnected. That was before phone get to me. Now it wont start* pc find only unknown device while phone is connected by fbus-jaf.

    Now logs:


    Jaf over usb/Dead usb



    JAF version 1.98.62

    Detected PKEY:

    Card life counter: 99.99%

    P-key nokia module version 01.02

    Detected JAF INTERFACE version: 01.B4* Driver version: 20601* Library version: 30119

    JAF DCT4/BB5 LOADERS DIR: C:Program FilesODEONJAFFlash

    JAF DCT4/BB5 PRODUCT DIR: C:Program FilesNokiaPhoenixProducts

    JAF USB LOADERS DIR: C:Program FilesODEONJAFFlashUSB

    JAF DCT3/DCTL LOADERS DIR: C:Program FilesODEONJAFFlash3

    USB Cable Driver version: 7.1.42.0

    Changing mode...Done!

    FILES SET FOR FLASHING:

    MCU Flash file: NONE

    PPM Flash file: NONE

    CNT Flash file: NONE

    APE Variant file: NONE

    Detected P-KEY:

    P-key nokia module version 01.02

    Init usb communication...

    Phone Type:

    FILES SET FOR FLASHING:

    MCU Flash file: C:Program FilesNokiaPhoenixProducts
    m-561
    m561__09.95.mcusw

    PPM Flash file: NONE

    CNT Flash file: NONE

    APE Variant file: NONE

    Detected P-KEY:

    P-key nokia module version 01.02

    Init usb communication...

    Phone Type:

    FILES SET FOR FLASHING:

    MCU Flash file: C:Program FilesNokiaPhoenixProducts
    m-561
    m561__09.95.mcusw

    PPM Flash file: C:Program FilesNokiaPhoenixProducts
    m-561
    m561__09.95.ppm_ea

    CNT Flash file: NONE

    APE Variant file: NONE

    Detected P-KEY:

    P-key nokia module version 01.02

    Init usb communication...

    Phone Type:

    FILES SET FOR FLASHING:

    MCU Flash file: C:Program FilesNokiaPhoenixProducts
    m-561
    m561__09.95.mcusw

    PPM Flash file: C:Program FilesNokiaPhoenixProducts
    m-561
    m561__09.95.ppm_ea

    CNT Flash file: C:Program FilesNokiaPhoenixProducts
    m-561
    m561__09.95_ISM_006.image_ea_black_ctv_pl_v2

    APE Variant file: NONE

    Backing up CRT...

    Detected P-KEY:

    P-key nokia module version 01.02

    Init usb communication...

    Failed to backup CRT...

    Detected P-KEY:

    P-key nokia module version 01.02

    Init usb communication...

    PRESS POWER ON NOW!

    Searching for phone...Found

    Sending RAW loader...

    Using 06.02.002

    Elf2flash 09.07.000

    CMT RAW loader...



    Patching RAW boot step1...

    Patching RAW boot step3...

    Sending RAW Loader...

    ...................Loader Sent!

    Stage 2 starting.......................................... .....................................Loader Sent!

    Stage 3 starting..................Phone prepared OK!

    Waiting for the phone to boot...

    Searching for phone...

    Phone failed to boot in flash mode CMT...



    Jaf over fbus :


    Manual mode selected* version cant be checked!

    Booting phone...

    Error sync the phone...


    I even try fbus and usb cabel* on dead usb :


    Init usb communication...

    PRESS POWER ON NOW!

    Searching for phone...Found

    Error reading phone init data...


    Over phoenix dead usb: same as jaf:


    Phone failed to boot in flash mode CMT...



    Pleas help me with these phone.

    ps. Sorry for my bad english* still learning.

  2. #2
    Member
    Join Date
    Apr 2012
    Posts
    565

    Thumbs up nokia 2700c-2 rm-561 disconnected while flashing + charging problem - Nokia issue solution ?




     
    ic flash die* use new flash


 
+ Reply to Thread

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts